November 19, 2013 § 1 Comment
Ho, ho, ho! Christmas is coming, whether you like it or not! I’m still in denial, even though it was a couple of months ago that we were ‘doing’ Christmas on Simply Crochet. I think that’s part of the problem. I am lulled into a false sense of security because we are forced to think about it early, but this makes me feel as though I am doing something about it, when actually, I am not.
I present to you my amigurumi Santa, from Issue 12 of Simply Crochet. He does get a cheeky look-in on the cover, but you will find him on p.85. When I made him I had the idea of doing three of them in different sizes like Russian dolls, but there wasn’t the time or the space really for the pattern. Now I have managed to accomplish the task here they are, Little, Large, and er, Middle Sized. The full pattern for the Large version is in the magazine, and there are guidelines below for making the other two, although you may need to refer to the original pattern for some of the details. Yes, this is deliberate, because a) I will be in trouble if I reveal too much of the pattern from the mag ;-), and b) I would love you to be acquainted personally with the awesome mag that is Simply Crochet.
The diagram and table below (click on the image for a full-sized version) show the general shaping instructions you will need, and also how many rounds to work in each colour. You start at the top of the Hat and work down. There is also a stitch diagram for the moustache, as this differs slightly from the one for the Large size. Use the same pattern for the moustache of the Middle and Small, but use a 2.5mm hook for the Small.
Further instructions for the details are as follows (with a gentle reminder that I am using UK crochet terms): Hat Bobble Make a slightly smaller bobble for both these two, using only 3 rounds. Make the first round 6dc, the second 12dc, and the third 6dc. You might like to use a smaller hook for the Small sized one.
Hat Brim Follow the same principle as for the Large Santa, by working a plain round of dc, followed by a round where you increase evenly around, and then another plain round of dc. For the Middle Santa increase by 6sts evenly on the increase round, and for the Small Santa increase by 5sts evenly.
Beard and Face For the Middle Santa start with 10dc and follow the pattern as for the Large Santa. For the Small Santa start with 8dc. For the Face, follow the same principle as for the Large Santa, working 4 rows for the Middle, and 3 rows for the Small.
November 12, 2013 § 2 Comments
I was working at the Renegade Craft Fair in London on Saturday, on the Anova books/Mollie Makes stand. There was such a buzz there, and great to see so many quality designer/makers selling their work. I had a scout round at lunchtime with the intention of buying some Christmas presents, but I think I ended up with more ideas for my own Christmas wish list than anyone else’s! I really liked these Manolo earrings and Kayleigh O’Mara‘s work also caught my eye, although there were so many others worthy of attention.
I was there to run a couple of crochet workshops for Anova, to promote the Mollie Makes books. The workshop project was to make my little reindeer from the Christmas book. We had fun!
On a separate note, I have had a huge response to my last post on an alternative to the crochet circle. I will write a follow-up post shortly to explain a few more points about this. TTFN!
November 4, 2013 § 23 Comments
You know the score. You’ve been making crochet circles the same way since I Don’t Know When, but they are never quite right – the seam, having to smooth out the corners… I’ve been trying to find a way of improving on the basic crochet circle where you close off each round with a slip stitch. This is easy to work and easy to count, but the slip stitch at the end of the round creates a visible seam, and you also need to stagger the increases to stop the ‘corners’ becoming obvious.
The second way of doing it is the spiral. This has the advantage of losing the seam, but it is more tricky to keep track of the stitch count (stitch markers may be needed!), and when you have finished there is a visible ‘step’ at the end which needs smoothing out. It also doesn’t work if you want to work a different colour for each round.
What I’ve come up with combines the advantages of working in closed off rounds with those of the spiral:
- It is easier to count
- It has a less visible seam,
- It can be worked in coloured stripes
- It is a much smoother circle than the traditional ‘closed off’ method.
It has probably been done before at some point, and although I couldn’t find anything like it when I searched, it may be lurking somewhere!
When you work a circle, you will usually have 6 evenly spaced increases in each round, either by putting the increase first and then the required number of plain stitches, or the plain stitches followed by the increase, for example:
Round 4 Ch1 (does not count as stitch), (2dc in next st, 4dc) repeat to end of round.
Round 4 Ch1 (does not count as stitch), (4dc, 2dc in next st) repeat to end of round.
There will be an increase stitch either at the beginning or the end of the round unless you are staggering the increases.
This ‘perfect circle’ method requires the increase stitch to always be the first stitch of the round, but instead of working both of those increase stitches in the first stitch at the same time, you will work one of those stitches at the beginning of the round, complete the round, and then work the second of those increase stitches in the same stitch as the first stitch to close off the round.
I’ve written out the pattern below, and then the walkthrough photographs explain each step in detail.
UK terms used throughout.
Make a magic loop or other foundation ring.
Round 1 Ch1, 6dc into the loop, do not close off with a slip stitch.
Round 2 Ch1, 1dc into first st, 2dc into each of next 5 sts, 1dc into same st as first st of round. [12 sts]
Round 3 Ch1, skip first st of last round, (1dc into next st) twice, (2dc in next st, 1dc) 5 times, working the last dc in the beginning ch-1 sp, 1dc into same st as first st of round. [18 sts]
Round 4 Ch1, skip first st of last round, 3dc, (2dc in next st, 2dc) 5 times, working the last dc in the beginning ch-1 sp, 1dc into same st as first st of round. [24 sts]
Round 5 Ch1, skip first st of last round, 4dc, (2dc in next st, 3dc) 5 times, working the last dc in the beginning ch-1 sp, 1dc into same st as first st of round. [30 sts]
Continue in the same fashion, increasing 6 sts evenly every round, splitting the first increase over the beginning and end of the round, and working in the beginning ch-1 sp.
Before fastening off, slip stitch in the next stitch.
Work 6dc into a magic loop as you would do usually for a circle.
Ch1, 1dc into first st, 2dc into each of next 5 sts.
You will now have worked 11 stitches out of 12, so work the last dc of the round in the same stitch as the first st of the round to complete it. You will see that what would have been 2dc in the first stitch of a conventional circle has been ‘split’, so that 1 of those 2 dc has been worked at the beginning of the round, and 1 at the end of the round.
At this point you will have 12dc worked for the second round, but you may notice that the first stitch of the round is more or less covered up by the last stitch. You will skip this covered first stitch at the beginning of the next round, which will mean that there are only 11 stitches numbered on the photo for the next round. When you ch1 at the start of the next round, it will provide an extra stitch in which to work.
This image shows the ch1 and first st of the next round. You will see that there are now 12sts in which to work the next round. The first stitch of this round counts as the first increase stitch, which will be completed at the end of the round. The pattern for this round in a conventional circle is (2dc in next st, 1dc), and as we have already worked what counts as the increase st, work 1dc in the next st, before 2dc in the following stitch. Continue around until the last 4 stitches of the round, and the following image will show where to work the last 4 stitches of the round.
The last 4 stitches of the round (marked in red and yet to be worked on the image) will be an increase, a dc worked in the ch1 at the beginning of the round, and a dc in the same stitch as the first dc of the round to complete the increase stitch.
This round is now complete.
Things to remember…
If you try and count the stitches once you have finished the round by counting the top ‘bumps’ of the stitches you will always appear to have one less stitch than you should have, but it’s ok – it’s just because the beginning and end stitches aren’t joined that it appears this way. This confused me no end when I was working this out!
If you are fastening off, you can slip stitch in the next stitch. Otherwise continue to work the following rounds as for the pattern of a conventional circle, remembering the following points:
- Ch1 at the start of the round
- Split the first increase stitch at the beginning and end of the round
- The last 2 stitches of each round are 1dc in the beginning ch1 and 1dc in the same stitch as the first stitch of the round